There are more and more of you reading my blogs and watching my videos on YouTube channel and I am beyond grateful if I was able to help you in any way. I am finally starting to form a group of creative individuals who are interested in similar topics like me. We are helping each other and growing together so thank you again!
Back to the Container Darkroom. There is less and less work that needs to be done until I will be able to say I am finished. At this point there are mostly details left or just some modifications that I need to make after finally using the darkroom. The first modification is dimming the led safelights more with aluminium channels. Even though the lights can be dimmed a lot with the remote I still want to have an option for an even dimmer setup so I went ahead and bought some LED channels that have a milky white screen on them. They are mostly used for installation on kitchen cabinets. Installation was easy. First I peeled off the already installed LED lights from the shelves and then with a help of some double-sided tape I glued the channels to the shelf. Inside the channels I ran the old LEDs and closed it off with the milky plastic screen. Now the lights are much dimmer than they were before.
If I had to dim the safelights I was struggling with insufficient lightning on the ceiling when I was making videos for the channel. Originally there was only one long light installed in the middle of both the light and dark part of my Container. This central setup was really problematic because even though the lights are very bright it still did not provide enough light to the sink and the counter. Even worse when I was standing by the counter my body was throwing one big shadow on the counter itself which is a big no go when you try to film what you are doing. In terms of brightness and colour temperature I really like the lights that were originally installed so I bought two more and installed one more into each room. Installation went quite smoothly despite the cable organisation and wiring which is always pain in the ass anyway 😀
After the installation of the second light now there are two lights running parallel mounted 30cm away from the outside wall. This means that the light is now running along the middle of the counter so there are no more shadows when I am working. I hope I am done with wiring for some time now…